|
|
|
For more information,
Click on the options
below
|
|
|
Seamless Gutter FAQ's
What does the term "seamless gutters" mean?
It means, simply, that our gutters are made on the jobsite using a
special machine that makes gutters out of flat coil stock. The only other
option is to purchase pre manufactured gutters that come in fixed lengths.
The fixed lengths never match the dimensions of the house which means that
joints, or seams, have to be made to allow the gutters to fit the house.
These joints are weak spots that can leak. Our gutters are made to fit the
dimensions of your house without "seams".
Are "seamless gutters" as good as factory gutters?
Many seamless gutter machines could only bend lighter guage aluminum
which was .027 inches thick. The better factory made gutters are .032 inches
thick. BSR's portable seamless gutter machine was designed for .032 aluminum
so our seamless gutters match the best factory made gutters.
Are colors available?
Yes. Alcoa has a wide variety of colors in their high quality baked
enamel finish. Ask our representative for samples of colors that can
compliment any color scheme you could imagine. Many other companies may only
have white and brown available.
How are the gutters installed?
It depends on the construction of your house. If you have a "fascia"
board at the edge of your roof (a fascia board is a vertical board nailed to
the bottom edge of your roof), we will use a special hanger that uses a
special screw to attach firmly to your roof edge. We do not use "spike and
ferrules" which are long aluminum nails that are driven through the lip of
the gutter. Spikes and ferrules loosen up over time with the expansion and
contraction of the gutters allowing the gutters to fall off the house. If
you do not have a fascia board, we may have to use "roof hangers" which are
supports that extend up on top of the shingles.
Are gutters guaranteed?
We will guaranty that your gutters are properly installed and leak free
after installation. In our climate, though, gutters can take a beating with
the build-up of ice in severe winter weather. We cannot guaranty that
gutters will not be damaged by this ice build up. No gutter system is immune
from this damage.
How important is it to slope the gutters toward the drain?
Several decades ago, when gutters were usually made out of galvanized
steel, it was important to grade the gutters so there was no standing water
to create corrosion. Today, with aluminum gutters that do not corrode, some
standing water is not a problem. Many houses have irregular roof edges and
edges that are not level. We will adjust the slope of the gutters to
be as aesthetically pleasing as possible following the existing edge of the
roof whether it is level or not. This may result in some standing water
which is not a problem.
Will you dispose of my old gutters?
Of course. The salvage value of old aluminum is minimal. If you would
like to keep your old gutters for salvage value, please do. Our disposal is
included with the job.
How do I get an estimate for new gutters?
Just contact us.
Estimates are free. A BSR representative will be able to help answer any
additional questions you may have.